Ø110mm Sanding Drum | Ø30mm Bore

Description

The 110mm sanding drum is a real workhorse. It has the perfect diameter for a CNC machine and also table milling machines. The basic profile knobs are made longer and beveled at the tips. This special geometry leads to a particularly harmonious sanding result. This sanding drum can be used on CNC machines as well as on throughfeed and table machines.

The body of the sanding drum is made of aluminum, making it particularly light and not susceptible to sticking to the shaft. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.

To open the bayonet lock and change the sanding sleeve, a suitable hexagon key is included in the scope of delivery. Each sanding drum is delivered with a 120 grit sanding sleeve. Our sanding drum can optionally be equipped with an HSK63F holder.